Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and How to Replace the Timing Belt on a Fiat Ducato 2.3 - Iveco Daily

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
This video is currently unavailable

In today's tutorial video, see how to remove and replace the timing belt on the Fiat Ducato 2.3 MultiJet, as well as on the Iveco Daily 2.3; the belt should generally be replaced between 100,000 and 150,000 miles: a visual inspection is typically performed after the first mileage indicated.

First, remove the serpentine belt by loosening the tensioner; then unscrew the bolt from the crankshaft pulley to remove it, as shown in the video.

At this point, remove the timing cover and loosen the nut to remove and replace the timing belt, taking all necessary references. The replacement of the water pump is also illustrated later.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
How to Replace the Timing Belt on a Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) Hello, today’s goal is to replace the timing belt on your Fiat Ducato. Start by positioning the van on a flat surface and ensuring the engine is cold…
How to replace the timing belt on a Fiat Ducato?
How to replace the timing belt on a Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) To replace the timing belt on a Fiat Ducato, open the bonnet to access the engine compartment and remove the left side panel of the engine. You will …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos