Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on a Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Timing belt

To replace the timing belt on a Fiat Ducato, open the bonnet to access the engine compartment and remove the left side panel of the engine. You will also need to remove the front right wheel by loosening the appropriate bolts and removing the wheel arch liner. This will allow access to the pulleys, particularly the tensioner roller, which must be loosened to reduce the tension on the timing belt. The old belt can then be removed and replaced with a new spare part, re-tightening the pulley nuts and reassembling the removed parts.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Fiat Ducato 2.5 D
Guide to Replacing the Timing Belt on the Fiat Ducato 2.5 D
Fiat Ducato (1981-1993 / MK 1) The instructions in this guide will allow you to remove and replace the timing belt on the Fiat Ducato 2.5 D. First, open the engine cover of the veh…
How to Replace the Timing Belt on a Fiat Ducato 2.3
How to Replace the Timing Belt on a Fiat Ducato 2.3
Fiat Ducato (2006-2014 / X250) .. In this very short video tutorial, learn how to replace the timing belt on a Fiat Ducato produced from 2006 to 2014. This operation is complicated.. …
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
Fiat Ducato (2006-2014 / X250) The presented video helps when you need to replace the timing belt on the Fiat Ducato. Specifically, the work shown does not only demonstrate how to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos