Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Dashboard of a Fiat 500 L

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Dashboard

See other generations:
Video tutorial

Before you can start, open the front bonnet. This will give you all the space you need.

Begin by removing the heating hoses located behind the fuel tank, simply pulling them out of their housing. Once done, proceed to unscrew and remove the speedometer cable.

After disconnecting the speedometer cable, disconnect all the connectors located behind the dashboard. At this point, you will need to remove the knee bolster.

Returning to the cabin, continue by unscrewing and removing the button bezels, thus removing the buttons themselves. Once the buttons are removed, use a flathead screwdriver to pry out the ashtray.

After this, disassemble the speedometer by removing the two retaining clips located on its underside. When you have removed the speedometer, you can finally take out the dashboard, successfully completing the disassembly.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Fiat 500 (2012-2023 / 500 L) Before you can start, open the boot of your Fiat 500 and remove the boot carpet. This will give you access to the bolts securing the rear seat backre…
Fiat 500 (2007-2021 / 312) In this video tutorial, you will find instructions on how to dismantle the instrument cluster of a Fiat 500. First, disconnect one of the battery ter…
Fiat 500 (2007-2021 / 312) Before you start, sit in the driver's seat of your Fiat 500. Begin by prising off and removing the covers of the slots connected to the clips that se…

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos