Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the headlight bulbs on the second series Fiat Punto by following these simple steps. First, open the bonnet of your car and start by removing the rubber protective cap of the bulbs; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video.

At this point, replace it with a new one of the correct type (in this case, H1 type); a new LED bulb is being fitted, adapting it to the new connector.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Replacing Dipped Beam Bulbs on Fiat Punto Mk2
Replacing Dipped Beam Bulbs on Fiat Punto Mk2
Fiat Punto (1999-2011 / MK 2, 188) Do you want to replace the front headlight bulbs? Lift the bonnet and see how to remove the bulbs on a Punto. Remove the plastic protective cover beh…
Replacing the Front Headlight Bulbs
Replacing the Front Headlight Bulbs
Fiat Punto (1999-2011 / MK 2, 188) The difficulty of accessing the headlight bulbs for replacement in modern cars often drives many motorists to seek help from an auto electrician. In…
How to Replace the Front Bulbs of a Fiat Grande Punto
How to Replace the Front Bulbs of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will learn how to replace the front bulbs of a Fiat Grande Punto. Work after the car has been stationary for a while, ensuring it …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos