Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dipped Beam Bulbs on Fiat Punto Mk2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

Do you want to replace the front headlight bulbs? Lift the bonnet and see how to remove the bulbs on a Punto. Remove the plastic protective cover behind the front headlight, then detach the bulb holder from above the bulb. Replace the front headlight bulbs (ensure they are the same size and voltage). After replacing the damaged bulb, refit the protective cover of the headlight. Repeat the same procedure on the other indicator bulb. Once maintenance is complete, close the bonnet, turn on the ignition, and switch on the lights.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the dipped/main beam bulb on the Fiat Grande Punto, open the bonnet, go to the rear of the headlamp, remove the plastic cover using a smal…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…
How to use the "coming home" function on Grande Punto
How to use the "coming home" function on Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video we can see how to use the "Coming Home" function on the Fiat Grande Punto, to set the low beams so that they remain on for another 30 o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos