Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a 2 DIN car radio in the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Car stereo

To install a 2 DIN car radio in the Fiat Panda 169, first remove the old car radio and detach the glove compartment from the passenger side. This will allow you to pass the cables from the car radio housing and out through the glove compartment housing. All cables must be connected at the back of the device, following the instructions in the tutorial. Finally, secure the car radio inside the designated housing, also inserting its metal casing and plastic cover.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Fiat Panda
How to Replace the Radio in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you start, sit in the driver’s seat of your Fiat Panda. Begin by inserting the extraction keys into the holes on the front of the radio. This …
How to Install a Reversing Camera on the Fiat Panda?
How to Install a Reversing Camera on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To install a reversing camera on the Fiat Panda, first replace the vehicle's standard radio with one compatible with the device. Once the new radio i…
Guide to Replacing the Radio in the Fiat Panda
Guide to Replacing the Radio in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide will show you the procedure for removing and replacing the standard radio with an Android or 2DIN type in the Fiat Panda. First, get insid…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos