Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Carpet on the Fiat Panda 1 (141)

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the carpet covering on the floor of the Fiat Panda 141, first series, following the instructions below. First, remove the front and rear seats by unscrewing the bolts from the seat rails and detaching the bench seat and backrest; use an Allen key and then remove the seatbelt mounts as shown in the video.

At this point, also remove the centre tunnel and then detach the entire carpet covering, replacing it with the new one!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace Worn Carpets on the Fiat Panda
How to Replace Worn Carpets on the Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Let’s see how to replace the worn carpet on the Fiat Panda 141. It’s a job that anyone can do with a bit of patience. Move the seat forward and press…
How to Remove the Radiator on Fiat Panda 141 1100
How to Remove the Radiator on Fiat Panda 141 1100
Fiat Panda (1980-2003 / MK 1, 141) In this tutorial video, you will learn how to remove and replace the engine cooling radiator on a Fiat Panda 141 1100 Petrol. First, open the bonnet …
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
Fiat Panda (1980-2003 / MK 1, 141) In this video, you will see the steps that will allow you to dismantle and replace the rear wiper motor of the first series Fiat Panda 4x4, version 1…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos