Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Radiator on Fiat Panda 141 1100

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Radiator

In this tutorial video, you will learn how to remove and replace the engine cooling radiator on a Fiat Panda 141 1100 Petrol. First, open the bonnet of your car and remove the fastening bolts located at the front of the bumper using a socket spanner, as shown in the video. Next, disconnect and remove the air filter box and take out the radiator by disconnecting the coolant hose and the electrical connector for the fan; finally, replace it with the new one, following the video to the end!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (1980-2003 / 141, MK 1) To replace the radiator on a Fiat Panda 141, open the bonnet to access the engine bay and loosen the screws located at the top of the front bumper. T…
Fiat Panda (1980-2003 / 141, MK 1) Today's guide shows you the steps to remove and replace the heating radiator in the Fiat Panda. First, open the bonnet and start by removing the batt…
Fiat Panda (1980-2003 / 141, MK 1) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos