Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Heating Radiator in the Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Heater core

Today's guide shows you the steps to remove and replace the heating radiator in the Fiat Panda. First, open the bonnet and start by removing the battery, disconnecting both terminals; then remove the air filter box and disconnect the radiator hose, allowing the fluid to drain into a container, as shown in the video. Next, remove the plastic cover to access the heating radiator; unscrew the fastening screws to remove it and replace it with the new one, following the video tutorial to the end!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Radiator in a Fiat Panda
How to Replace the Heater Radiator in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this brief guide, you will learn how to remove and replace the heater radiator in a Fiat Panda. First, get inside the vehicle and start by removin…
Guide to Removing the Heating Radiator of the Fiat Panda
Guide to Removing the Heating Radiator of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to remove and replace the heating radiator of the Fiat Panda. First, get inside the vehicle and remove the…
How to Remove the Heating Radiator on a Fiat Panda
How to Remove the Heating Radiator on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Watch this video to learn how to remove the heating radiator from a Fiat Panda. First, remove the plastic cover from the centre tunnel (located under…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos