Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator on a Fiat Panda 141?

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Radiator

See other generations:
Video tutorial

To replace the radiator on a Fiat Panda 141, open the bonnet to access the engine bay and loosen the screws located at the top of the front bumper. This will allow you to remove the upper radiator supports, and you will need to perform the same operation for the lower ones.

Once the radiator is freed, disconnect the hoses and connectors attached to it so that you can replace it with a new spare part. The new radiator should then be properly secured and connected to the hoses and connectors.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radiator on Fiat Panda 141 1100
How to Remove the Radiator on Fiat Panda 141 1100
Fiat Panda (1980-2003 / MK 1, 141) In this tutorial video, you will learn how to remove and replace the engine cooling radiator on a Fiat Panda 141 1100 Petrol. First, open the bonnet …
Guide to Replacing the Heating Radiator in the Fiat Panda
Guide to Replacing the Heating Radiator in the Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Today's guide shows you the steps to remove and replace the heating radiator in the Fiat Panda. First, open the bonnet and start by removing the batt…
Multi-indicator for Fiat Panda 141 I.Meter P100
Multi-indicator for Fiat Panda 141 I.Meter P100
Fiat Panda (1980-2003 / MK 1, 141) If we want to renew the dashboard of our old and beloved Fiat Panda 141 without altering it too much, we have the option to install this useful acces…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos