Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Before starting, ensure all doors are closed. Begin by activating the instrument panel without starting the engine.

Press the button on the instrument cluster repeatedly until the word "Trip" appears on the multifunction display. Then, press the button repeatedly until the mileage is displayed.

At this point, press the call answer button for one second, followed by the "OK" button for five seconds. After this, press the selection button forward until the phrase "ASSYST PLUS" appears, confirm it, then select "FULL SERVICE" and confirm again by pressing "OK". Press the "OK" button and the "Back" button until you exit the menu.

This will successfully complete the reset.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Fiat Tipo (2016-2026 / 358, 356, 357) Below are the steps to reset the service light for the routine maintenance oil change on a Fiat Tipo. First, get in the vehicle and turn on the instr…
Fiat Tipo (2016-2026 / 358, 356, 357) In this short video, see how to reset the service light for routine maintenance of the oil change on the Fiat Tipo, as well as on all other vehicles …
Fiat Tipo (2016-2026 / 358, 356, 357) In this video, you will learn how to reset the service warning light for the oil change maintenance on a Fiat Tipo. To proceed with the reset, you ne…

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos