Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulb in the Control Panel

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument panel light

See other generations:
Video tutorial

This tutorial explains how to replace a burnt-out bulb in the air control panel of a Fiat Panda. No special tools are needed for this operation, just your hands.

Lift the two selectors of the control panel with your fingers and carefully pull out the entire button block. Locate the burnt-out bulb in the centre and pull it out. Replace it with a new one by simply inserting it in place of the one just removed.

Reassemble the control panel, ensuring that the selectors are aligned. Push and snap the control panel back into place as it was before.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Switch Panel from a Fiat Panda
How to Remove the Centre Switch Panel from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Using a spatula, lever one side of the switch panel. You can now remove it from its housing. Disconnect the connectors by lowering the red side lever…
Replacing the Cigarette Lighter Bulb in a Fiat Panda
Replacing the Cigarette Lighter Bulb in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this case, we have a Fiat Panda 169 as an example, but changing the cigarette lighter bulb is a similar procedure in all cars. So, whatever vehicl…
How to Change the Dipped Beam Bulb on a Fiat Panda
How to Change the Dipped Beam Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video guide shows how to replace the front H4 bulb of a second-generation Fiat Panda, produced from 2003 to 2012. Once the bonnet is open,…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos