Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Beam Bulb on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight bulb

This short video guide shows how to replace the front H4 bulb of a second-generation Fiat Panda, produced from 2003 to 2012. Once the bonnet is open, first remove the hook and then the plastic cap behind the front headlight. Next, disconnect the white connector of the bulb and lower the two metal tabs that hold it in place. Once done, you can extract the old dipped beam bulb and replace it with a new one, following the procedure in reverse for installation.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulbs on a Fiat Panda
How to Replace the Dipped Beam Bulbs on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This video tutorial demonstrates how to replace the dipped beam bulbs on a third-generation Fiat Panda, produced from 2012 to 2022. First, open the b…
How to Replace the Dipped/Main Beam Bulb on the Fiat Panda
How to Replace the Dipped/Main Beam Bulb on the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) To replace the dipped/main beam bulb on the Fiat Panda, start by opening the bonnet, disconnect the rear connector of the bulb, remove the rear cover…
Replacing the Cigarette Lighter Bulb in a Fiat Panda
Replacing the Cigarette Lighter Bulb in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this case, we have a Fiat Panda 169 as an example, but changing the cigarette lighter bulb is a similar procedure in all cars. So, whatever vehicl…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos