Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs of the Fiat Panda 3

Model: Fiat Panda - Years 2012-2021
Part: Headlight bulb

In today's video, see how to remove and replace the dipped and main beam bulbs of the front headlight of the Fiat Panda third series. First, open the bonnet and start by removing the plastic cover found behind the headlamp; then release the metal clip and extract the bulb along with the electrical connector, as shown in the video. Next, replace the bulb with a new one of the correct type (in this case, a new H7 LED bulb); then insert it correctly into the bulb holder and subsequently into the light unit!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Headlight Bulbs on a Fiat Panda
Replace Headlight Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the headlight bulbs on your Panda damaged? Not lighting up anymore? Here's how to change them. Open the bonnet by pulling the lever located at th…
How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…
How to replace the rear headlight bulbs of the Fiat Panda 3
How to replace the rear headlight bulbs of the Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) Today we will explain how to replace the rear headlight bulbs of a Fiat Panda 3 vehicle. The bulbs we suggest using for replacement are the Bolch mod…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos