Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car stereo

Switch off the engine and the ignition, then remove the key. Insert the appropriate needle tools into the four holes at the corners of the radio and pull to extract it. Voila! Nothing easier! At this point, you will have the radio in your hand. First, disconnect the antenna, then the two connectors by pressing the tabs that hold them in place (do not pull the wires!). It is advisable to install a DIN adapter in place of the old radio. Next, insert the frame provided with the new unit, after passing all the cables through it, which you will connect to the new radio. Finally, insert it into position and fit the protective plastic.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Car Radio from Fiat Grande Punto
Removing the Car Radio from Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Need to replace the car radio in a Fiat Grande Punto? Let's go through the replacement. Enter the cabin, insert the release keys into the holes on th…
How to Replace the Radio in a Fiat Punto
How to Replace the Radio in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before you can start, sit in the driver's seat of your Fiat Punto. Begin by inserting the extraction keys into the holes on the top front of the radi…
How to Replace the Radio in a Fiat Grande Punto
How to Replace the Radio in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Punto. Begin by inserting the appropriate extraction keys into the holes on the front of the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos