Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Position Bulbs on a Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

To replace the rear position bulbs on a Fiat 500, open the boot and remove the entire headlight assembly. You will need to remove the support screws using a socket spanner.

Next, disconnect the connector by pressing the tab, then remove the bulb support plate. To remove the bulb, apply a slight pressure and turn it to the left.

Once replaced, reinsert the plate, which will click into place thanks to the tabs. Then reconnect the connector and position the headlight assembly back in place, securing it with the screws.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to perform a service and reset the service light on the Fiat 500 X?
How to perform a service and reset the service light on the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos