|
Do it yourself
| |||
| ||||
How to Change the Oil and Reset the Service Light on a Fiat Idea
Model: Fiat Idea
MK 1
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this video, you will learn how to perform an engine oil change on a Fiat Idea. As the first step, position a sufficiently large container under the oil sump. Use a spanner to unscrew the oil sump bolt to allow the used oil to drain out, waiting until the process is complete. Refit the sump with its bolt and open the engine compartment. Fill with new oil suitable for your vehicle, unscrew the yellow cap and pour in the new oil, then reset the service light. To reset the service light, turn on the ignition without starting the engine and within the next 10 seconds, press the accelerator three times. Turn off the ignition, then turn it back on and start the engine to complete the oil service light reset procedure.
Updated on 8 May 2026 by ScegliAuto
Related tutorials
Fiat Idea
(2003-2016 /
MK 1)
To reset the service light after completing all necessary operations, turn on the instrument panel of your 2003 Fiat Idea and immediately press the T…
Fiat Idea
(2003-2016 /
MK 1)
Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
Fiat Idea
(2003-2016 /
MK 1)
In this mini guide dedicated to your Fiat Idea Mk2, we will discover where the fuse box is located. Before starting, remember that any replacement or…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |