Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Interior Bulbs in the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Instrument panel light

Start with the central ceiling light, removing it using a flathead screwdriver. Pry it out from one side and then you can replace the bulb by pulling it from its socket. To make it easier, you can also disconnect the power connector. Now that you have the ceiling light in hand, extract the bulb and replace it, specifically with an LED bulb. As there is no check for correct operation, it shouldn't cause you any issues even if the bulb is not of the canbus type, meaning it does not have an integrated resistor. Proceed in the same manner for the boot.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bulbs of the Fiat Panda
How to Replace the Front Bulbs of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will learn how to replace the front bulbs of the Fiat Panda. First, open the front bonnet. If necessary, remove the fuse box. T…
Replace Headlight Bulbs on a Fiat Panda
Replace Headlight Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the headlight bulbs on your Panda damaged? Not lighting up anymore? Here's how to change them. Open the bonnet by pulling the lever located at th…
How to Replace the Dipped Beam Bulbs in a Fiat Panda
How to Replace the Dipped Beam Bulbs in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video will show you how to remove the old H4 bulbs for the dipped beams in your Fiat Panda and replace them with new bulbs. This is a simp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos