Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Repairing the Window Regulator Motor

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Power window motor

See other generations:
Video tutorial

The following guide shows how to remove the panel and fix the glass. If pressing the button does not open the glass, it has likely come loose from the motor's clip.

To remove the panel, unscrew all the screws present. The tools needed for this operation include a knife to remove the protective cover that shields the door from the panel, to detach the adhesive holding it, and a hex key. Once all screws are removed, pull the handle wire and completely detach the panel, then you can also proceed to remove the cover with the knife.

The guide shows that the problem was due to a broken plastic clip that needs to be replaced, possibly sourcing the part from an old motor.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Remove the Window Regulator Motor from a Fiat Panda
How to Remove the Window Regulator Motor from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the window regulator motor from a Fiat Panda and don't know how to do it? Let's see how to proceed in this video: disconnect the batter…
Removing the wiper motor and arm on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, you will see how to remove and replace the arm and motor of the front wipers on a second-generation Fiat Panda. First, open and lift t…
Replacement of the starter motor of the Fiat Panda
Replacement of the starter motor of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the procedure on how to disassemble and replace the starter motor of the Fiat Panda, in simple steps. First, we open the hood of th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos