|
Do it yourself
| |||
| ||||
Service Reset Manual Procedure
Model: Fiat Multipla
MK 1
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Video tutorial
Once the mileage for maintenance is reached, a maintenance warning appears on the instrument cluster display. After performing the maintenance (engine oil and filter replacement), you can manually reset the SERVICE message without using diagnostic tools by following these instructions: 1 Close all doors (otherwise the display will show an open door indication and prevent reading other messages); 2 Turn on the ignition without starting the engine; 3 Press and hold the MODE button until the MENU appears; 4 Use the "+" or "-" buttons to scroll through the menu until the indication "TRA KM XXX" appears; 5 Press and hold the "+" and "-" buttons simultaneously for at least 10 seconds until the new mileage for the maintenance interval is displayed; 6 Release the buttons; 7 Press the MODE button to confirm; 8 Turn off and then turn on the ignition to verify the reset.
Updated on 10 February 2026 by ScegliAuto
Related tutorials
Fiat Multipla
(1998-2010 /
MK 1)
To reset the Service light on a Fiat Multipla, turn on the instrument panel and press the button located under the rev counter, corresponding to the …
Fiat Multipla
(1998-2010 /
MK 1)
The cigarette lighter fuse on your Fiat Multipla is located inside the fuse box. The fuse box is situated on the upper left side of the dashboard, be…
Fiat Multipla
(1998-2010 /
MK 1)
In this video, you will learn how to reset the "service" light for periodic maintenance on a second-generation Fiat Multipla. First, press the mod bu…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |