Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reversing Light Bulbs in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Tail light bulb

In this tutorial, you will see how to replace the reversing light bulbs in the Fiat 500, a very simple and quick operation. To do this, you will need to first remove the headlamp; you can do this by opening the tailgate and unscrewing the two fixing bolts along the inner edge. Next, grasp the headlamp, pull it out from the bodywork, and disconnect the connector at the back. At this point, you can remove the rear plate where the bulbs are located by unlocking the clips around the perimeter. Finally, proceed with replacing the bulb by following the reverse procedure to reassemble everything.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Reversing Light Bulb in a Fiat 500?
How to Replace the Reversing Light Bulb in a Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will learn how to replace the reversing light bulb in a Fiat 500, a very simple and quick task. Before proceeding, ensure that …
How to replace the daytime running light of the Fiat 500
How to replace the daytime running light of the Fiat 500
Fiat 500 (2007-2024 / 312) To replace the front daytime running light bulb of the Fiat 500, start by going to the inner wing on the driver's side, remove a cover from the panel…
How to Remove the Rear Light of a Fiat 500
How to Remove the Rear Light of a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, learn how to remove the rear light of a Fiat 500 and replace the bulbs. Open the boot lid, and using a screwdriver, unscrew the securi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos