Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the reverse light bulb on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light bulb

This tutorial shows how to replace the reverse light bulb on a Fiat 500, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Start by going to the rear right wheel, then locate the cover in the rear of the wheel arch and open it. Next, grasp the bulb holder, turn it slightly counterclockwise, and pull it out from the light assembly. At this point, insert the replacement bulb and follow the reverse procedure to reassemble everything.

Updated on 19 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the daytime running light of the Fiat 500
How to replace the daytime running light of the Fiat 500
Fiat 500 (2007-2024 / 312) To replace the front daytime running light bulb of the Fiat 500, start by going to the inner wing on the driver's side, remove a cover from the panel…
How to Replace the Rear Light Bulb on the Fiat 500
How to Replace the Rear Light Bulb on the Fiat 500
Fiat 500 (2007-2021 / ) If you need to replace the rear light bulb on your Fiat 500 yourself, just follow the instructions in this mini guide. Before proceeding, remember to…
How to Install the Reversing Camera in a Fiat 500?
How to Install the Reversing Camera in a Fiat 500?
Fiat 500 (2007-2024 / 312) To install the reversing camera in a Fiat 500, you need to completely remove the internal trim of the tailgate: once it is removed, you can position …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos