Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Factory Reset on the Fiat Tipo Radio

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Warning light – error code

If you are experiencing serious operational issues with the radio in your Fiat Tipo Mk2, you must perform a factory reset to resolve any software errors. To do this, follow the simple steps outlined below. First, turn on the ignition and the radio. Next, press the "Menu" button and select "System Settings" followed by "Factory Reset". Confirm the operation when prompted and wait for the radio to restart automatically. Once completed, you can use it again without any issues, but you will need to reset any preferences in the settings.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the uConnect system in the Fiat Tipo?
How to reset the uConnect system in the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) If you need to reset the uConnect system in the Fiat Tipo to factory settings, you can see how to do it in the attached video guide, applicable to al…
How to Remove the Original Radio from a Fiat Tipo
How to Remove the Original Radio from a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to remove the original radio from a Fiat Tipo. First, use a plastic lever to remove the trim around the radio, then, using the lever again, unscr…
How to Remove the Original Radio from a Fiat Tipo
How to Remove the Original Radio from a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Here’s how to remove the original radio from a Fiat Tipo: Use a plastic lever to remove the trim surrounding the radio, then use a screwdriver to uns…

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to reset the Uconnect system in the Fiat Tipo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos