Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Tire pressure warning light

In this video tutorial, you will learn how to reset the tyre pressure warning light on the Fiat 500 by following the instructions below. First, get in the car and turn on the instrument cluster; then scroll using the plus and minus buttons on the instrument cluster until you reach the tyre pressure reset option that appears on the display, as shown in the video. At this point, press the button located at the bottom to confirm the reset of the TPMS warning light, in order to clear the light from the instrument cluster; then start the engine!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Fiat 500?
Fiat 500 (2007-2024 / 312) In order to reset the tire pressure warning light on the Fiat 500, you need to inflate the tires until they reach the recommended pressure value: thi…
Resetting Tyre Pressure Light on a Fiat 500
Resetting Tyre Pressure Light on a Fiat 500
Fiat 500 (2007-2024 / 312) This tutorial explains how to reset the tyre pressure warning light on a Fiat 500. To reset this light, there are no special procedures to follow as …
How to reset the tire pressure warning light on the Fiat 500e
How to reset the tire pressure warning light on the Fiat 500e
Fiat 500 (2020-2026 / 500 E, 332) Following the instructions in this guide, we will see how to reset the tire pressure warning light (TPMS) of the Fiat 500e; before performing the res…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - What does the Fiat 500 tire pressure warning light mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos