Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Windshield wipers

In this video tutorial, you will see how to replace the wipers on the Fiat Tipo by following simple steps. Replacing the wipers on the Fiat Tipo is not difficult; just lift the wiper arms to change the blades. First, get inside the vehicle, insert the key, and turn off the ignition. Once the ignition is off, turn the wiper control to the highest speed; do this three times and the wiper arms will move to the vertical position. Now step outside (the blade sizes are 65 cm for the long one and 40 cm for the short one). Press the button on the wiper arm and slide out the blade, then replace it with the new one.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Fiat Tipo
How to Replace the Wiper Blades on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Replacing the wiper blades on a Fiat Tipo is a very simple task to carry out independently. Start the car to position the wipers vertically, then lif…
How to replace the front windshield wipers of the Fiat Tipo
How to replace the front windshield wipers of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this guide we will see the instructions that will allow us to disassemble and replace the front windshield wipers of the Fiat Tipo. First of all, …
Replacing the Rear Windscreen Wiper Blade on the Fiat Tipo 356
Replacing the Rear Windscreen Wiper Blade on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) In this video tutorial, learn how to remove and replace the rear wiper blade on the Fiat Tipo 356, 357, and 358 in simple and quick steps. First, obt…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos