Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuel Cap Lock on a Fiat?

Model: Fiat Fiat Various
Part: Fuel cap

Video tutorial

When the locking mechanism of the fuel cap breaks and you can no longer lock it, follow these steps to change the lock cylinder: first, get a sharp object to release the internal part of the cap by lifting the tabs. Inside, you will find a small plastic gear.

Next, remove the metal tab located behind the lock cylinder. Insert the key into the lock and pull firmly towards you. At this point, the lock cylinder will come out along with the key. Refit the lock onto the new cap with the key inserted.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Fiat Fiat Various The issue of a broken fuel cap on Fiat models is more common than you might think. But how can you repair it cost-effectively? The first step is to p…
Fiat Fiat Various Press the designated button to extend the key into the usable position. This will give you access to the small latch that holds the side cover in pla…
Fiat Fiat Various In this video, you will see how to change the gearbox oil in a Fiat with a MultiJet engine: the vehicle in question has already covered over 93,205 m…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos