Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refit the Starter Motor on a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Starter motor

To refit the starter motor on the vehicle, lift the car from under the engine compartment, position the motor in its housing, and secure it with its bolts. Reconnect the power supply and the electrical terminals, then reposition the battery and fuel filter support, securing it with screws. After that, place the battery back in its housing, refit and reconnect the fuel filter outlet hoses, reconnect the terminals starting with the positive and then the negative of the battery, and the job will be complete.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Fiat Grande Punto?
How to Replace the Starter Motor on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the starter motor on a Fiat Grande Punto, open the bonnet to disconnect the terminals connected to the battery; once the device is disconn…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…
Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's main instructions will show us how to disassemble and replace the starter motor of the Fiat Grande Punto 1.3 Multijet. First, we open the hoo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos