Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Removing and replacing the headlight bulb

Fiat Doblo - Video tutorial

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Headlight bulb
Operation: Removing and replacing the headlight bulb

This video shows us how to remove and replace the bulbs in the headlight of our car. First we identify which bulb needs to be replaced whether the sidelight bulb or the dipped beam headlight bulb. Once the bulb has been identified, we begin to remove the rubber cover that hermetically closes the housing; later if it is the position light bulb, rotate its base and extract it. If, on the other hand, we want to change the dipped beam headlight bulb, it will be necessary to disconnect the electrical contacts and then it will be necessary to unhook its seat from the steel stop that anchors it.


Posted on 1 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2009-2021 - How to replace the low beam bulbs in the Fiat Doblò? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos