Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Fiat Siena

Model: Fiat Siena MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

Video tutorial

Today, follow this brief and simple guide to remove and replace the front brake pads on the Fiat Siena. First, lift the vehicle and start by removing the front wheel; then, unscrew the bolts securing the brake caliper, using a lever on the piston to retract it, as shown in the video.

At this point, remove the old pads and replace them with new, high-quality ones; clean the caliper of any residual dirt and insert the new pads in the correct orientation, finally reassembling everything!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the cabin of the Fiat Siena?
Where is the fuse box located in the cabin of the Fiat Siena?
Fiat Siena (1996-2017 / MK 1) If you own a Fiat Siena and want to find out where the interior fuse box is located, just read the following guide and follow the described procedure…
How to Remove the Steering Wheel from the Fiat Siena
How to Remove the Steering Wheel from the Fiat Siena
Fiat Siena (1996-2017 / MK 1) Removing the steering wheel from the Fiat Siena is a straightforward task you can do yourself. Follow these steps: - Disconnect the vehicle's battery…
Replacing Low Beam Headlight Bulb on Fiat Siena
Replacing Low Beam Headlight Bulb on Fiat Siena
Fiat Siena (1996-2017 / MK 1) Learn how to replace the low beam headlight bulb on your Fiat Siena if it has burned out. Open the hood and stand in front of the affected headlight.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos