Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel of the Fiat Siena

Model: Fiat Siena MK 1 - Years 1996-2017
Part: Steering wheel

Disassembling the steering wheel of the Fiat Siena is a very simple operation to perform independently. The steps to be followed are: -disconnect the vehicle's battery to prevent the airbag contained inside the steering wheel from activating inadvertently; -insert a hex key into the side holes and rotate twice to loosen; -remove the central part of the steering wheel, where the airbag is located; -disconnect the connector; -unscrew the central nut of the steering wheel with the hex key; -remove the steering wheel; Once the damaged steering wheel is removed, we can proceed with the replacement.

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Column on the Fiat Palio/Siena
How to Remove the Steering Column on the Fiat Palio/Siena
Fiat Siena (1996-2017 / MK 1) As shown in the video, removing the steering column on a Fiat Palio or Siena is quite simple and can be done in a few steps. You may need to remove t…
Where is the fuse box located in the cabin of the Fiat Siena?
Where is the fuse box located in the cabin of the Fiat Siena?
Fiat Siena (1996-2017 / MK 1) If you own a Fiat Siena and want to find out where the interior fuse box is located, just read the following guide and follow the described procedure…
How to Remove the Center Console of the Fiat Siena Dashboard
How to Remove the Center Console of the Fiat Siena Dashboard
Fiat Siena (1996-2017 / MK 1) Discover in this guide how to remove the center console of the Fiat Siena dashboard by following the instructions below. First, get inside the vehicl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos