Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Bulb in the Fiat Palio

Model: Fiat Palio MK 1 - Years 1996-2007
Part: Instrument cluster

To replace the dashboard bulb, start by removing the transparent plastic cover. Use two screwdrivers to act on the appropriate clips. Once the transparent plastic is removed, mark the position of the needles with insulating tape to remember their position when at minimum. To detach the needle, first remove the black cover by pulling it upwards. To remove the needles, force downwards until you unlock the pin from the plastic. Remove the black casing with a screwdriver. Once the black casing is removed, you can detach the needles by turning them counter-clockwise and pulling them upwards. Do the same for all the needles. Once all the needles are removed, take off the motor cover, then detach the board and remove the clips holding it in place. Once the board is removed, use tweezers to pull the LED upwards and desolder the LED.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam Bulb on a Fiat Palio
Fiat Palio (1996-2007 / MK 1) If the dipped beam bulb on your Fiat Palio burns out, it is important to replace it as soon as possible for your safety and to avoid penalties. Open …
What is and where is the fuse box diagram of the Fiat Palio located?
What is and where is the fuse box diagram of the Fiat Palio located?
Fiat Palio (1996-2007 / MK 1) It is important to clarify that the position of the fuse boxes of the Fiat Palio 2007 is identical to those of the Fiat Palio 2012-2015, which is the…
Guide to Removing the Starter Motor from the Fiat Palio 1.7 TD
Guide to Removing the Starter Motor from the Fiat Palio 1.7 TD
Fiat Palio (1996-2007 / MK 1) This guide provides instructions for removing and replacing the starter motor on the Fiat Palio 1.7 TD. First, lift the vehicle and locate the starte…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos