Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on a 2016 Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Warning light – error code

The video shows how to reset the service light on a 2016 Fiat Tipo. This is a very simple operation that can be done independently and requires only a few steps. With the doors closed, turn on the ignition without starting the engine, until position 1. Press the button in the bottom right repeatedly until the display shows the TRIP message. Press the button again repeatedly until the display shows KM or TEM READING. Press the call acceptance button. Then, while holding it down, press the OK button within 1 second. Hold the OK button for 5 seconds. Scroll through the menu and then press OK first on ASSYST PLUS and then on FULL SERVICE. Exit the menu. Turn off the ignition and then start the engine to verify that the reset was successful.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) The Service light reset on the Fiat Tipo cannot be performed using the appropriate commands within the onboard computer: to execute the reset, a diag…
Fiat Tipo (2016-2026 / 356, 357, 358) This short and simple guide will show you how to reset the maintenance light on the Fiat Tipo. First, get into the vehicle and connect your diagnosti…
Fiat Tipo (2016-2026 / 356, 357, 358) On the Fiat Tipo, to reset the Service light, turn the ignition key to switch on the instrument panel. Navigate through the menu on the onboard compu…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to reset the Uconnect system in the Fiat Tipo? Read answer

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos