Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

On the Fiat Tipo, to reset the Service light, turn the ignition key to switch on the instrument panel. Navigate through the menu on the onboard computer using the arrows on the left side of the steering wheel until you find the spanner icon. At this point, connect a diagnostic tool to the vehicle's OBD port and follow the reset instructions provided by the software. Once the reset is complete, disconnect the scanner from the port and you can also switch off the instrument panel.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) When the Service light illuminates on the Fiat Tipo display, it indicates that the scheduled service period has been exceeded. The light cannot be re…
How to reset the Service light on the Fiat Tipo?
How to reset the Service light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) The Service light reset on the Fiat Tipo cannot be performed using the appropriate commands within the onboard computer: to execute the reset, a diag…
How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the Service light on a Fiat Tipo, you must first change the oil and the corresponding filter as indicated in the tutorial. Next, enter the c…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos