Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
500 L
- Years 2012-2023 The video shows how to reset the tire pressure of a Fiat 500L. It is an elementary but important operation that takes a few seconds. After turning on the panel, without starting the engine, press the SET key and then navigate with the arrow keys, on the sides of the SET key, in the menu on the display until the RESET TIRES item appears. Press SET, then set YES with the arrows and press SET again. At this point the yellow tire pressure warning light goes out. Turn off the ignition and then start the engine to verify that the warning light remains off.
Posted on 13 July 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |