Do it yourself
Frequently asked questions about cars and motorcycles

Fitting the longitudinal bars on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012

The video shows how to install the longitudinal bars on a Fiat Panda 169. It is an operation that can be done without having to resort to a mechanic and can be done in a few simple steps. Use a Phillips screwdriver to unscrew the rubber screws located on the roof of the car. Proceed with the assembly of the left bar resting it on the holes. Then insert the bolt with the 10 wrench to tighten the bar to the roof. Then place the caps to cover the bolts. Follow the same procedure for the right longitudinal bar. To disassemble them, just carry out the procedure described above in reverse.

Posted on 18 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) In the case in question we have as an example a Fiat Panda 169, but be aware that changing the cigarette lighter bulb is a similar procedure in all c…
Fiat Panda (2003-2012 / 169, MK 2) Let's see in this video how to remove and replace the rear landslide jaws on a Fiat Panda 169, second series. First of all we lift the car and we go …
Fiat Panda (2003-2012 / 169, MK 2) How do you replace the buttons on the remote key of your Fiat Panda? Let's see how to do it in this video. Take your remote key and use a screwdriver…

    Frequently Asked Questions

    • Panda 2003-2012 - What are the most common electrical problems found in the Fiat Panda? Read answer
    • Panda 2012-2024 - What to do when the 4x4 is not available on the Fiat Panda? Read answer
    • Panda 2012-2024 - For how many people is the Fiat Panda approved? Read answer
    • Panda 2012-2024 - How many seats does the Fiat Panda have? Read answer
    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer
    • Panda 2012-2024 - Where is the Panda's jack located? Read answer
    • Panda 2003-2012 - How many kilometers do you travel with the reserve fuel of a Fiat Panda? Read answer
    • Panda 2012-2024 - What problems with the viscous coupling of the Fiat Panda? Read answer
    • Panda 2012-2024 - How much luggage can the Fiat Panda carry? Read answer
    • Panda 2012-2024 - Why is the battery of the Fiat Panda Hybrid not charging? Read answer

Reset the Service Light on Fiat Bravo

Has the service light appeared on the instrument cluster of your Fiat Bravo? Let's reset it. Turn on the ignition, press the "Set" button located on the central dashboard, then, once in the settings menu, scroll using the up/down buttons until you find the "Reset Maintenance" option. Select it with the set button to turn off the tyre pressure warning light and exit the settings menu. Check the instrument cluster by turning it off and on again with the ignition key. Retry the reset if the issue persists.

Watch the video!


by ScegliAuto

More videos