Do it yourself
Frequently asked questions about cars and motorcycles

How to enter the key code for the Fiat Punto

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Key

In this video, we will see how to recover when the key code no longer works, and consequently, the car does not recognise it and won't start. Here’s how to get it started even if the key is uncoded: fully press the accelerator and notice that the injection light comes on after a while and will eventually turn off. Now, if you release the accelerator pedal, you will notice the light blinking (turning on and off cyclically), and you need to stop this count based on the code number; for example, if the code is 13479, proceed as follows: wait for 1 blink, keep the accelerator pressed and wait for the light to turn off; wait for 3 blinks, keep the accelerator pressed and wait for the light to turn off; wait for 4 blinks, keep the accelerator pressed and wait for the light to turn off; wait for 7 blinks, keep the accelerator pressed and wait for the light to turn off; wait for 9 blinks, keep the accelerator pressed and wait for the light to turn off. As soon as the light starts blinking faster, start the engine and the car will start.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short and simple guide, you will see the steps to reset and enter the radio code for unlocking stations on the Fiat Grande Punto. To reset yo…
Fiat Punto (1999-2011 / MK 2, 188) The unlock code for the Fiat Punto radio can be obtained by removing the device: to extract it from its housing, insert the relevant release keys int…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to pair your smartphone via Bluetooth to the radio of the Fiat Grande Punto (or Punto Evo). Once the ignition is…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos