Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the Fiat 500 door panel

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Door panel
Operation: How to remove the Fiat 500 door panel

Let's see briefly how to remove and replace the front door panel of the Fiat 500, in simple and quick steps. First we open the front door and begin to remove the plastic cap that we find inside the handle; after which we unscrew the two fixing screws that we find below, as shown in the video. At this point we remove the cover of the opening handle, unscrewing the additional screws that we find inside the hole; we pry the sides of the panel to detach and remove it, disconnecting the electric connector of the window control panel!


Posted on 31 July 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos