Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of My Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

This short guide shows how to remove the rear light of a second-generation Fiat Panda in simple and quick steps. First, open the boot and unscrew the fixing screws of the rear light, located on the sides, using a cross-head screwdriver.

Once done, you can pull out the rear light. To completely remove it, disconnect the electrical connector of the bulbs found at the back.

Now, you can take out the bulb holder to access all the bulbs in the light and replace them or fix any loose connections as shown in the video. To reassemble, apply the reverse procedure.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on My Fiat Panda 4x4?
How to Replace the Alternator on My Fiat Panda 4x4?
Fiat Panda (1980-2003 / MK 1, 141) In this video, you will learn how to remove (and perform maintenance on) the alternator of your Fiat Panda. First, open the bonnet and start by remov…
How to perform an oil change on my Fiat Panda?
How to perform an oil change on my Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) If you need to carry out maintenance on your 2004 Fiat Panda independently, this short guide will be useful. First, lift the vehicle and start by rem…
How can I reset the service light on my Fiat Panda?
How can I reset the service light on my Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To reset the maintenance service indicator on your Fiat Panda, first enter the vehicle. Then, turn on the instrument panel (you will see the maintena…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos