Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Fiat 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

If you need to replace the rear light bulb on your Fiat 500 yourself, just follow the instructions in this mini guide. Before proceeding, remember to disconnect the battery and wear rubber gloves for added safety.

Once done, go to the rear of the car and fully lift the boot. Using a suitable screwdriver, unscrew the two screws of the light and then remove it. Disconnect it from the connector and remove the plastic cover.

At this point, simply unscrew the old bulb and replace it with a new one. Finally, reposition everything correctly and reconnect the battery.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Replacing the rear light bulb of the 2015 Fiat 500 L is a straightforward task that you can do independently. First, open the boot. Next, remove the …
How to replace the rear headlight bulb of a Fiat 500?
How to replace the rear headlight bulb of a Fiat 500?
Fiat 500 (2007-2024 / 312) To replace the rear headlight bulb of a Fiat 500, you need to follow some steps. First, open the rear hatch and locate the compartment behind which t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos