Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you replace the Fiat Punto spark plugs?

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Spark plugs
Operation: How do you replace the Fiat Punto spark plugs?

In order to replace the spark plugs on the Fiat Punto you have to open the hood so that you can unscrew the bolts that secure the upper part of the engine block. In this way, this cover can be removed and the underlying components can be accessed by disconnecting the coils connected to the spark plugs themselves. Therefore, once the coils have been removed, a socket wrench can be used to extract the spark plugs from inside its housing: when the old spark plugs have been removed, it will be possible to insert the new ones, connecting the coils and closing the upper part of the block. motor.


Posted on 3 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - What causes the cold start problem of the Fiat Grande Punto 1.2 8V? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the spark plugs on the Fiat Punto 1.3 multijet? Read Answer
    • Punto 1999-2011 - How much do the spark plugs on the 2001 Fiat Punto 1.2 ELX cost? Read Answer
    • Punto 1999-2011 - How much do the Fiat Punto spark plugs cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos