Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble the Dashboard of a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Dashboard

To disassemble the dashboard of a Fiat Grande Punto, loosen the screws located at the back of the steering wheel so that the front airbag can be removed. Then, by loosening the underlying pin, you can completely remove the steering wheel itself; at this point, proceed to detach the cover surrounding the radio and loosen all the screws securing the other plastic covers of the dashboard. The light switches must also be removed by unscrewing their bolts and disconnecting their connectors; when all these parts are removed, you can install the new covers that make up the dashboard.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
How to Remove the Gear Knob from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Is the gear knob on your Fiat Grande Punto damaged? Here’s how to remove and replace it. Hold the knob and turn it to the left; unscrew it until it i…
How to Remove the Front Headlamp from a Fiat Grande Punto
How to Remove the Front Headlamp from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to replace the front headlamp of a Fiat Grande Punto? This guide shows how to remove the headlamp from the car's bodywork. Lift the boot lid, an…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos