Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Front headlight disassembly instructions

Fiat Punto - Video tutorial

Model: Fiat Punto 176, MK 1 - Years 1993-1999
Part: Headlight
Operation: Front headlight disassembly instructions

In order to disassemble the front light, it is first necessary to remove the side indicator light fixed by means of the interlocking tabs; once the indicator light has been removed, unscrew the fixing pins of the headlight, one on the side right on the arrow side, one on the bonnet grille and the other on the internal edge, towards the radiator; once all the fixing pins have been removed, pull the headlight forward and disconnect the sockets from the relevant lamp holders. It is an extremely simple operation to carry out and does not require special equipment or precautions.


Posted on 10 August 2023 by ScegliAuto



How to replace the headlight bulb on a Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Before starting, we will have to open the front hood of our Fiat Punto. So let's start by disengaging and removing the rear cover of the burned out h
Removing the front headlight on Fiat Punto
Fiat Punto (1999-2011 / 188, MK 2) Let's see how we remove the headlight of a Fiat Punto. We open the bonnet and put it in safety with the dipstick; remove the front bumper (screws pla
Removing the Fiat Punto headlight
Fiat Punto (1999-2011 / 188, MK 2) In today's video tutorial we will see how to remove the headlight of a second series Fiat Punto, without particular difficulty. First we open and lif

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - Where are the sidelights on Fiat Grande Punto? Read Answer
    • Punto 1999-2011 - How to remove the headlight on Fiat Punto mk2? Read Answer
    • Punto 2005-2018 - How much do the headlights of a used Fiat Punto cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos