Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

Video tutorial

Today, in this video tutorial, learn how to remove and replace the headlight bulb on the Fiat Freemont, as well as the Dodge Journey. First, open the bonnet and disconnect the electrical connector of the headlight bulb; then extract the bulb holder along with the bulb to remove it, as illustrated in the video.

At this point, reposition the new bulb inside the headlight, connecting the electrical cable; to replace the position bulb, simply remove the cable and replace the small bulb. Now, reassemble everything!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Removing the Rear Light on Fiat Freemont - Dodge Journey
Removing the Rear Light on Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. to remove the rear light on a Fiat Freemont and a Dodge Journey by following these simple instructions. First, open the boot and unscrew the two fixing.. …
Removing the Front Seat of the Dodge Journey - Fiat Freemont
Removing the Front Seat of the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. which also applies to the driver's seat, of the Dodge Journey and Fiat Freemont. First, open the front door and start unscrewing the fastening screws.. …
How to Remove the Front Seat of the Dodge Journey - Fiat Freemont
How to Remove the Front Seat of the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. replace the front seat of the Fiat Freemont and Dodge Journey. First, open the front door and start by removing the plastic cover on the side of the.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos