Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the EGR Valve on the Fiat Avventura

Model: Fiat Avventura MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: EGR valve

Video tutorial

In this brief guide, you will find the main instructions on how to remove and clean the EGR valve. First, open the hood of your car and locate the EGR valve, which is situated at the top of the engine compartment; then disconnect the hose and the manifold attached to the valve by unscrewing the mounting screws and moving away the various pipes, as shown in the video.

At this point, unscrew the screws of the EGR valve, disconnecting its electrical connector; then remove it and clean it with appropriate degreasers, replacing it if damaged!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Scan with Diagnostic Software on the Fiat Avventura
How to Scan with Diagnostic Software on the Fiat Avventura
Fiat Avventura (2014-2018 / MK 1) Discover in this brief and simple guide how to scan for errors and reset on the Fiat Avventura by following the instructions below. First, get in the…
How to Open the Hood of the Fiat Avventura
How to Open the Hood of the Fiat Avventura
Fiat Avventura (2014-2018 / MK 1) In this video tutorial, you will see the steps to open the hood of the Fiat Avventura, even in an emergency, in simple and quick steps. First, open t…
How to Remove the Spare Tire on a Fiat Avventura?
How to Remove the Spare Tire on a Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) In this tutorial, you will see how to remove the spare tire from the rear hatch of a Fiat Avventura, a very simple operation necessary in case of a f…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos