Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Suspension of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Suspension system

Today, follow these instructions to remove and replace the front suspension of the Fiat Bravo. First, open the bonnet and start by loosening the nut located at the top of the suspension using a 19 mm socket spanner; then lift the vehicle and remove the front wheel. Next, disconnect the suspension from the bottom by unscrewing the bolt attached to the lower arm, as shown in the video; finally, replace the suspension with the correct new one, applying the reverse procedure of disassembly!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlights of the Fiat Bravo
How to Remove the Front Headlights of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Follow these instructions to remove and replace the front headlights of the Fiat Bravo. First, open the bonnet of your car and start unscrewing the f…
How to Replace the Front Fog Lights on a Fiat Bravo
How to Replace the Front Fog Lights on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will see how to remove and replace the front fog lights on a Fiat Bravo, following the instructions below. First, open th…
Replacing Rear Suspension on Fiat Bravo 2
Replacing Rear Suspension on Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will learn how to remove and replace the rear shock absorbers on a second series Fiat Bravo by following these simple steps.…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos