Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb of the Fiat 500 L

Model: Fiat 500 500 L - Years 2012-2023
Part: Interior dome light bulb

In this video tutorial, we will see how to remove and replace, in simple steps, the bulb of the interior light found on the ceiling of the Fiat 500 L. First, get inside the vehicle and start by removing the interior light; to do this, pry at the sides with something thin, as shown in the video. At this point, remove the small bulb from the electrical contacts and replace it with the new one; insert it the correct way round and turn on the light to check its operation, then reassemble everything!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the lights of the Fiat 500 X ceiling light
How to disassemble the lights of the Fiat 500 X ceiling light
Fiat 500 (2014-2022 / 500 X) Replacing the ceiling light bulb of the Fiat 500 X is a simple and quick operation that can be done independently thanks to our short video tutorial …
Guide to Replacing the Interior Light Bulbs
Guide to Replacing the Interior Light Bulbs
Fiat 500 (2007-2024 / 312) Carefully disengage the interior light and disconnect the power connector. Using a flat screwdriver, lever to open the lamp holder compartment, you w…
How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos