Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

In this video tutorial, you can see how to remove the instrument cluster from a Fiat Punto mk2 by following a few simple steps: first, remove the trim surrounding the instrument cluster; there are 4 screws holding it in place; one is at the top and the other is at the bottom.

Now unscrew the 4 screws using a 3mm Allen key and remove the trim.

Once you have removed the trim, for better access and more space to pull out the cluster, you can also lower the steering wheel by adjusting the lever under the steering column. At this point, there are three more screws to unscrew to free the cluster from its seat; use a 4mm Allen key. Once the screws are removed, the cluster can be taken out; also disconnect the connector.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of the Fiat Punto Evo
How to Remove the Instrument Cluster of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Here are step-by-step instructions to remove and replace the instrument cluster of the Fiat Punto Evo, as well as the Grande Punto. First, get inside…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…
How to Remove the Instrument Cluster on a Fiat Grande Punto
How to Remove the Instrument Cluster on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How do you remove the instrument cluster on a Fiat Grande Punto? Follow these steps for a smooth removal. Detach the plastic trim around the instrume…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos