Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Punto 1.9 JTD

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Diesel fuel filter

See other generations:
Video tutorial

Today, you will learn, in this short and simple guide, how to remove and replace the diesel filter on a Fiat Punto 1.9 JTD. First, open the bonnet of your car and locate the diesel filter, situated at the top of the engine; then, remove the engine cover and disconnect the fuel pipes from the filter, followed by disconnecting the electrical connector located underneath, as shown in the video.

Now, replace the filter cartridge with the new one; then reassemble everything, applying the reverse procedure!


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter of the Fiat Punto 2 1.9 JTD
How to Remove the Diesel Filter of the Fiat Punto 2 1.9 JTD
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove and replace the diesel filter of the second series Fiat Punto with a 1.9 JTD engine. First, open…
How to Replace the Diesel Filter on a Fiat Punto
How to Replace the Diesel Filter on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto and disconnect the negative terminal of the battery to work safely. Begin by unclipping and movi…
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Replacing the Diesel Filter on the Fiat Punto 1.3 Multijet
Fiat Punto (1999-2011 / MK 2, 188) Below are the necessary instructions to remove and replace the diesel filter on the Fiat Punto 1.3 Multijet. First, open the bonnet of your car and s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos