Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Application of stickers on the bodywork of a Fiat 500 Abart

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Bodywork
Operation: Application of stickers on the bodywork of a Fiat 500 Abart

Let's see how to apply stickers on the bodywork of the Fiat 500 Abart to make it even more aggressive. First we have to clean the car thoroughly and with even greater attention, with alcohol, on the surfaces in direct contact with the adhesive. The first goes on the lower right side of the wing mirror, the iconic "595". Then the writing "Abart" on the outer shell. For this we must take measures to ensure that it is perfectly centered. The Youtuber applies a small "595" writing also on the lower right part of the dipped beam. He then applies the larger series of stickers to the front grille to make it the same as the "695". Then apply a series of black/graphite stickers on the internal chrome of the steering wheel and the robotised gearbox. You can find these and other stickers for your car on the crazywrap website. It.


Posted on 22 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to repaint the Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to paint a Fiat 500? Read Answer
    • 500 2007-2022 - What problem could the roof of the Fiat 500 present? Read Answer
    • 500 2007-2022 - How much does it cost to paint the Fiat 500? Read Answer
    • 500 2012-2023 - What is the cost for the panoramic roof on the Fiat 500? Read Answer
    • 500 2014-2022 - How much does it cost to repaint a Fiat 500? Read Answer
    • 500 2014-2022 - Where is the fuel cap of the Fiat 500X located? Read Answer
    • 500 1957-1975 - How much does the Fiat 500 sunroof cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos