Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Toro
  6. : How to reset the Fiat Toro service?

Fiat Toro - Video tutorial

Model: Fiat Toro MK 1 - Years 2016-2023
Part: -board computer
Operation: How to reset the Fiat Toro service?

After having carried out the coupon which provides for the replacement of the oil and the filter, it will be necessary to reset the service signal present on the display of the on-board computer, to do this it is necessary to sit in the driver's seat, turn on the ignition and not turn on the engine, fully depress the accelerator pedal and then hold it down and simultaneously press the brake pedal and release it 5 times. Then wait another 10 seconds and release the accelerator pedal, then turn off the ignition and wait another 10 seconds and turn the ignition back on, in this way the service signal will have been reset.


Posted on 4 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos